1

huangxiaoqiang

3 天以前 3296ae7c136f405db78c395635e72efa1c0d0125

 ÏîÄ¿´úÂë/WCS/WIDESEAWCS_Server/WIDESEAWCS_QuartzJob/Service/DeviceInfoService.cs

@@ -89,9 +89,9 @@
                    string[] sourceCodes = stackerhand.SourceAddress.Split("-");
                    if (sourceCodes.Length == 3)
                    {
                        stackerCraneTaskCommand.StartRow = (byte)Convert.ToSByte(sourceCodes[0]);
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(sourceCodes[1]);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(sourceCodes[2]);
                        stackerCraneTaskCommand.StartRow = (byte)Convert.ToSByte(GetRowCode(Convert.ToInt32(sourceCodes[0])));
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(sourceCodes[2]);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(sourceCodes[1]);
                    }
                    else
                    {
@@ -101,9 +101,9 @@
                    string[] targetCodes = stackerhand.TargetAddress.Split("-");
                    if (targetCodes.Length == 3)
                    {
                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(targetCodes[0]);
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(targetCodes[1]);
                        stackerCraneTaskCommand.EndLayer = (byte)Convert.ToSByte(targetCodes[2]);
                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(GetRowCode(Convert.ToInt32(targetCodes[0])));
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(targetCodes[2]);
                        stackerCraneTaskCommand.EndLayer = (byte)Convert.ToSByte(targetCodes[1]);
                    }
                    else
                    {
@@ -116,9 +116,9 @@
                    string[] sourceCodes = stackerhand.SourceAddress.Split("-");
                    if (sourceCodes.Length == 3)
                    {
                        stackerCraneTaskCommand.StartRow = (byte)Convert.ToSByte(sourceCodes[0]);
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(sourceCodes[1]);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(sourceCodes[2]);
                        stackerCraneTaskCommand.StartRow = (byte)Convert.ToSByte(GetRowCode(Convert.ToInt32(sourceCodes[0])));
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(sourceCodes[2]);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(sourceCodes[1]);
                    }
                    else
                    {
@@ -127,9 +127,9 @@
                    string[] targetCodes = stackerhand.TargetAddress.Split("-");
                    if (targetCodes.Length == 3)
                    {
                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(targetCodes[0]);
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(targetCodes[1]);
                        stackerCraneTaskCommand.EndLayer = (byte)Convert.ToSByte(targetCodes[2]);
                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(GetRowCode(Convert.ToInt32(targetCodes[0])));
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(targetCodes[2]);
                        stackerCraneTaskCommand.EndLayer = (byte)Convert.ToSByte(targetCodes[1]);
                    }
                    else
                    {
@@ -142,9 +142,9 @@
                    string[] sourceCodes = stackerhand.SourceAddress.Split("-");
                    if (sourceCodes.Length == 3)
                    {
                        stackerCraneTaskCommand.StartRow = (byte)Convert.ToSByte(sourceCodes[0]);
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(sourceCodes[1]);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(sourceCodes[2]);
                        stackerCraneTaskCommand.StartRow = (byte)Convert.ToSByte(GetRowCode(Convert.ToInt32(sourceCodes[0])));
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(sourceCodes[2]);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(sourceCodes[1]);
                    }
                    else
                    {
@@ -154,9 +154,9 @@
                    string[] targetCodes = stackerhand.TargetAddress.Split("-");
                    if (targetCodes.Length == 3)
                    {
                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(targetCodes[0]);
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(targetCodes[1]);
                        stackerCraneTaskCommand.EndLayer = (byte)Convert.ToSByte(targetCodes[2]);
                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(GetRowCode(Convert.ToInt32(targetCodes[0])));
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(targetCodes[2]);
                        stackerCraneTaskCommand.EndLayer = (byte)Convert.ToSByte(targetCodes[1]);
                    }
                    else
                    {
@@ -169,9 +169,9 @@
                    string[] sourceCodes = stackerhand.SourceAddress.Split("-");
                    if (sourceCodes.Length == 3)
                    {
                        stackerCraneTaskCommand.StartRow = (byte)Convert.ToSByte(sourceCodes[0]);
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(sourceCodes[1]);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(sourceCodes[2]);
                        stackerCraneTaskCommand.StartRow = (byte)Convert.ToSByte(GetRowCode(Convert.ToInt32(sourceCodes[0])));
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(sourceCodes[2]);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(sourceCodes[1]);

                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(0);
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(0);
@@ -192,9 +192,9 @@
                        stackerCraneTaskCommand.StartColumn = (byte)Convert.ToSByte(0);
                        stackerCraneTaskCommand.StartLayer = (byte)Convert.ToSByte(0);

                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(targetCodes[0]);
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(targetCodes[1]);
                        stackerCraneTaskCommand.EndLayer = (byte)Convert.ToSByte(targetCodes[2]);
                        stackerCraneTaskCommand.EndRow = (byte)Convert.ToSByte(GetRowCode(Convert.ToInt32(targetCodes[0])));
                        stackerCraneTaskCommand.EndColumn = (byte)Convert.ToSByte(targetCodes[2]);
                        stackerCraneTaskCommand.EndLayer = (byte)Convert.ToSByte(targetCodes[1]);
                    }
                    else
                    {
@@ -205,8 +205,10 @@
                {
                    return content.Error("未找到任务命令");
                }

                StackerSendCommand(stackerCraneTaskCommand, stackerhand.DeviceCode);
                return content;

                return content.OK("命令下发成功！");
            }
            catch (Exception ex)
            {
@@ -225,7 +227,7 @@
                {
                    CommonStackerCrane commonStackerCrane = (CommonStackerCrane)device;

                    commonStackerCrane.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(2));
                    commonStackerCrane.SetValue(StackerCraneDBName.WorkType, Convert.ToSByte(2));
                    return content.OK();
                }
                else
@@ -250,7 +252,7 @@
                {
                    CommonStackerCrane commonStackerCrane = (CommonStackerCrane)device;

                    commonStackerCrane.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(2));
                    commonStackerCrane.SetValue(StackerCraneDBName.WorkType, Convert.ToSByte(2));
                    return content.OK();
                }
                else
@@ -282,7 +284,7 @@
                    commonStackerCrane.SetValue(StackerCraneDBName.StartColumn, command.StartColumn);
                    Thread.Sleep(100);

                    commonStackerCrane.SetValue(StackerCraneDBName.StartColumn, command.StartLayer);
                    commonStackerCrane.SetValue(StackerCraneDBName.StartLayer, command.StartLayer);
                    Thread.Sleep(100);

                    commonStackerCrane.SetValue(StackerCraneDBName.EndRow, command.EndRow);
@@ -292,11 +294,11 @@
                    Thread.Sleep(100);
                    commonStackerCrane.SetValue(StackerCraneDBName.EndLayer, command.EndLayer);
                    Thread.Sleep(100);
                    commonStackerCrane.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(command.WorkType));
                    commonStackerCrane.SetValue(StackerCraneDBName.WorkType, Convert.ToSByte(command.WorkType));
                }
                else
                {
                    throw new Exception("请在堆垛机联机模式、待机状态、无故障的情况下下发任务");
                    throw new Exception($"请在{commonStackerCrane.DeviceName}联机模式、待机状态、无故障的情况下下发任务");
                }
            }
            else
@@ -305,7 +307,29 @@
            }
        }


        public int GetRowCode(int number)
        {
            if (number == 1 || number == 15 || number == 11 || number == 19)
            {
                return 1;
            }
            else if (number == 2 || number == 5 || number == 8 || number == 12 || number == 16 || number == 20)
            {
                return 2;
            }
            else if (number == 3 || number == 6 || number == 9 || number == 13 || number == 17 || number == 21)
            {
                return 3;
            }
            else if (number == 4 || number == 7 || number == 10 || number == 14 || number == 18 || number == 22)
            {
                return 4;
            }
            else
            {
                throw new ArgumentOutOfRangeException(nameof(number), "输入的数字必须在1-16范围内");
            }
        }
        public class StackerCraneTaskCommand
        {
            #region <Public Menber>
@@ -495,10 +519,10 @@
                    if (device != null)
                    {
                        CommonConveyorLine conveyorLine = (CommonConveyorLine)device;
                        ushort x = conveyorLine.GetValue<ConveyorLineDBName, ushort>(ConveyorLineDBName.InteractiveSignal, stationManager.stationChildCode);
                        short x = conveyorLine.GetValue<ConveyorLineDBName, short>(ConveyorLineDBName.InteractiveSignal, stationManager.stationChildCode);
                        var structs = BitConverter.GetBytes(x).ToArray().ToBoolArray();
                        short ConveyorLineTaskNum = conveyorLine.GetValue<ConveyorLineDBName, short>(ConveyorLineDBName.ConveyorLineTaskNum, stationManager.stationChildCode);
                        int ConveyorLineAlarm = conveyorLine.GetValue<ConveyorLineDBName, int>(ConveyorLineDBName.ConveyorLineAlarm, stationManager.stationChildCode);
                        uint ConveyorLineAlarm = conveyorLine.GetValue<ConveyorLineDBName, uint>(ConveyorLineDBName.ConveyorLineAlarm, stationManager.stationChildCode);
                        ConveyorLineTaskCommand obj = new()
                        {
                            InStock = structs[2] == true ? "有货" : "空闲",
@@ -532,6 +556,12 @@
                    if (device != null)
                    {
                        CommonConveyorLine conveyorLine = (CommonConveyorLine)device;
                        short x = conveyorLine.GetValue<ConveyorLineDBName, short>(ConveyorLineDBName.InteractiveSignal, stationManager.stationChildCode);
                        var structs = BitConverter.GetBytes(x).ToArray().ToBoolArray();
                        if (!structs[2])
                        {
                            return content.Error($"请在{stationManager.stationChildCode}输送线就绪情况下下发命令");
                        }
                        //入库
                        if (ConveyorLinehand.TaskType == "1")
                        {
@@ -683,7 +713,7 @@
            }
        }

        string AlarmInfo(int Alarm) => Alarm switch
        string AlarmInfo(uint Alarm) => Alarm switch
        {
            0 => "急停",
            1 => "变频器报警1",
@@ -741,227 +771,241 @@
                    if (RGVhand.DeviceCode == "RGV01" || RGVhand.DeviceCode == "RGV02")
                    {
                        CommonRGV_FirstFloor RGVcommand = (CommonRGV_FirstFloor)device;
                        if (RGVhand.TaskType == "1")
                        if (RGVcommand.GetValue<RGVDBName, bool>(RGVDBName.Automatic) && !RGVcommand.GetValue<RGVDBName, bool>(RGVDBName.Fault) && !RGVcommand.GetValue<RGVDBName, bool>(RGVDBName.Running))
                        {
                            if (RGVhand.SourceAddress != null)
                            if (RGVhand.TaskType == "1")
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                if (RGVhand.SourceAddress != null)
                                {
                                    PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandFirstFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}取定位命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}取定位命令取货位不能为空");
                            }
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandFirstFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}取定位命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}取定位命令取货位不能为空");
                                }

                        }
                        else if (RGVhand.TaskType == "2")
                        {
                            if (RGVhand.TargetAddress != null)
                            }
                            else if (RGVhand.TaskType == "2")
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                if (RGVhand.TargetAddress != null)
                                {
                                    PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandFirstFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}放定位命令下发成功");
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandFirstFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}放定位命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}放定位命令放货位不能为空");
                                }
                            }
                            else if (RGVhand.TaskType == "3")
                            {
                                if (RGVhand.SourceAddress != null)
                                {
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandFirstFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}取货命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}取货命令取货位不能为空");
                                }
                            }
                            else if (RGVhand.TaskType == "4")
                            {
                                if (RGVhand.TargetAddress != null)
                                {
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandFirstFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}放货命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}放货命令放货位不能为空");
                                }
                            }
                            else if (RGVhand.TaskType == "5")
                            {
                                if (RGVhand.TargetAddress != null && RGVhand.TargetAddress != null)
                                {
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                        PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandFirstFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}取放货命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}取放货命令放货位和取货位不能为空");
                                }
                            }
                            else if (RGVhand.TaskType == "6")
                            {
                                if (RGVhand.TargetAddress != null)
                                {
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                        TaskType = (byte)Convert.ToSByte(4),
                                    };
                                    SendCommandFirstFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}退命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}退回命令放货位不能为空");
                                }
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}放定位命令放货位不能为空");
                            }
                        }
                        else if (RGVhand.TaskType == "3")
                        {
                            if (RGVhand.SourceAddress != null)
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                {
                                    PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandFirstFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}取货命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}取货命令取货位不能为空");
                            }
                        }
                        else if (RGVhand.TaskType == "4")
                        {
                            if (RGVhand.TargetAddress != null)
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                {
                                    PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandFirstFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}放货命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}放货命令放货位不能为空");
                            }
                        }
                        else if (RGVhand.TaskType == "5")
                        {
                            if (RGVhand.TargetAddress != null && RGVhand.TargetAddress != null)
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                {
                                    PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                    PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandFirstFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}取放货命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}取放货命令放货位和取货位不能为空");
                            }
                        }
                        else if (RGVhand.TaskType == "6")
                        {
                            if (RGVhand.TargetAddress != null)
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                {
                                    PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandFirstFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}退命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}退回命令放货位不能为空");
                                return content.Error($"{device.DeviceName}未知任务命令");
                            }
                        }
                        else
                        {
                            return content.Error($"{device.DeviceName}未知任务命令");
                            return content.Error($"请在联机模式、无故障、待机状态时再下发{RGVcommand.DeviceName}命令");
                        }
                    }
                    else
                    {
                        CommonRGV RGVcommand = (CommonRGV)device;
                        if (RGVhand.TaskType == "1")
                        if (RGVcommand.GetValue<RGVDBName, bool>(RGVDBName.Automatic) && !RGVcommand.GetValue<RGVDBName, bool>(RGVDBName.Fault) && !RGVcommand.GetValue<RGVDBName, bool>(RGVDBName.Running))
                        {
                            if (RGVhand.SourceAddress != null)
                            if (RGVhand.TaskType == "1")
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                if (RGVhand.SourceAddress != null)
                                {
                                    PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandSecondFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}取定位命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}取定位命令取货位不能为空");
                            }
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandSecondFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}取定位命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}取定位命令取货位不能为空");
                                }

                        }
                        else if (RGVhand.TaskType == "2")
                        {
                            if (RGVhand.TargetAddress != null)
                            }
                            else if (RGVhand.TaskType == "2")
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                if (RGVhand.TargetAddress != null)
                                {
                                    PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandSecondFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}放定位命令下发成功");
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandSecondFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}放定位命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}放定位命令放货位不能为空");
                                }
                            }
                            else if (RGVhand.TaskType == "3")
                            {
                                if (RGVhand.SourceAddress != null)
                                {
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandSecondFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}取货命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}取货命令取货位不能为空");
                                }
                            }
                            else if (RGVhand.TaskType == "4")
                            {
                                if (RGVhand.TargetAddress != null)
                                {
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandSecondFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}放货命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}放货命令放货位不能为空");
                                }
                            }
                            else if (RGVhand.TaskType == "5")
                            {
                                if (RGVhand.TargetAddress != null && RGVhand.TargetAddress != null)
                                {
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                        PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandSecondFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}取放货命令下发成功");
                                }
                                else
                                {
                                    return content.Error("取放货命令放货位和取货位不能为空");
                                }
                            }
                            else if (RGVhand.TaskType == "6")
                            {
                                if (RGVhand.TargetAddress != null)
                                {
                                    RGVTaskCommand command = new RGVTaskCommand()
                                    {
                                        PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                        TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                    };
                                    SendCommandSecondFloor(RGVcommand, command);
                                    return content.OK($"{device.DeviceName}退回命令下发成功");
                                }
                                else
                                {
                                    return content.Error($"{device.DeviceName}退回命令放货位不能为空");
                                }
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}放定位命令放货位不能为空");
                            }
                        }
                        else if (RGVhand.TaskType == "3")
                        {
                            if (RGVhand.SourceAddress != null)
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                {
                                    PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandSecondFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}取货命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}取货命令取货位不能为空");
                            }
                        }
                        else if (RGVhand.TaskType == "4")
                        {
                            if (RGVhand.TargetAddress != null)
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                {
                                    PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandSecondFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}放货命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}放货命令放货位不能为空");
                            }
                        }
                        else if (RGVhand.TaskType == "5")
                        {
                            if (RGVhand.TargetAddress != null && RGVhand.TargetAddress != null)
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                {
                                    PickupLocation = (byte)Convert.ToSByte(RGVhand.SourceAddress),
                                    PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandSecondFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}取放货命令下发成功");
                            }
                            else
                            {
                                return content.Error("取放货命令放货位和取货位不能为空");
                            }
                        }
                        else if (RGVhand.TaskType == "6")
                        {
                            if (RGVhand.TargetAddress != null)
                            {
                                RGVTaskCommand command = new RGVTaskCommand()
                                {
                                    PutcargoLocation = (byte)Convert.ToSByte(RGVhand.TargetAddress),
                                    TaskType = (byte)Convert.ToSByte(RGVhand.TaskType),
                                };
                                SendCommandSecondFloor(RGVcommand, command);
                                return content.OK($"{device.DeviceName}退回命令下发成功");
                            }
                            else
                            {
                                return content.Error($"{device.DeviceName}退回命令放货位不能为空");
                                return content.Error($"{device.DeviceName}未知任务命令");
                            }
                        }
                        else
                        {
                            return content.Error($"{device.DeviceName}未知任务命令");
                            return content.Error($"请在联机模式、无故障、待机状态时再下发{RGVcommand.DeviceName}命令");
                        }
                    }
                    } 
                }
                return content.Error("未找到设备信息请联系IT");
            }
@@ -982,12 +1026,12 @@
                    if (DeviceCode == "RGV01" || DeviceCode == "RGV02")
                    {
                        CommonRGV_FirstFloor commonRGV = (CommonRGV_FirstFloor)device;
                        commonRGV.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(9));
                        commonRGV.SetValue(RGVDBName.TaskType, Convert.ToSByte(9));
                    }
                    else
                    {
                        CommonRGV commonRGV = (CommonRGV)device;
                        commonRGV.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(9));
                        commonRGV.SetValue(RGVDBName.TaskType, Convert.ToSByte(9));
                    }
                    return content.OK($"{device.DeviceName}复位成功");
                }
@@ -1037,12 +1081,12 @@
                    if (DeviceCode == "RGV01" || DeviceCode == "RGV02")
                    {
                        CommonRGV_FirstFloor commonRGV = (CommonRGV_FirstFloor)device;
                        commonRGV.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(9));
                        commonRGV.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(7));
                    }
                    else
                    {
                        CommonRGV commonRGV = (CommonRGV)device;
                        commonRGV.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(9));
                        commonRGV.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(7));
                    }
                    return content.OK($"{device.DeviceName}中断成功");
                }
@@ -1061,15 +1105,26 @@
                IDevice? device = Storage.Devices.FirstOrDefault(x => x.DeviceCode == DeviceCode);
                if (device != null)
                {
                    
                    if (DeviceCode == "RGV01" || DeviceCode == "RGV02")
                    {
                        CommonRGV_FirstFloor commonRGV = (CommonRGV_FirstFloor)device;
                        commonRGV.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(9));
                        DeviceProDTO? devicePro = commonRGV.DeviceProDTOs.Where(x => x.DeviceChildCode == commonRGV.DeviceCode && x.DeviceProParamName == "TaskType").FirstOrDefault();
                        //byte[] byt = Encoding.UTF8.GetBytes("08");
                        byte valueToWrite = 8;

                        byte[] buffer = new byte[] { valueToWrite };

                        commonRGV.Communicator.Write(devicePro.DeviceProAddress, buffer);
                    }
                    else
                    {
                        CommonRGV commonRGV = (CommonRGV)device;
                        commonRGV.SetValue(StackerCraneDBName.TaskType, Convert.ToSByte(9));
                        DeviceProDTO? devicePro = commonRGV.DeviceProDTOs.Where(x => x.DeviceChildCode == commonRGV.DeviceCode && x.DeviceProParamName == "TaskType").FirstOrDefault();
                        byte valueToWrite = 8;

                        byte[] buffer = new byte[] { valueToWrite };
                        commonRGV.Communicator.Write(devicePro.DeviceProAddress, buffer);
                    }
                    return content.OK($"{device.DeviceName}初始化成功");
                }
@@ -1167,6 +1222,25 @@
            #endregion <Public Menber>
        }

        public enum RGVDBName
        {
            SendTask,
            Automatic,
            WorkCompleted,
            Running,
            Fault,
            InStock,
            RGVTargetAddress,
            RGVTaskNum,
            PickupLocation,
            PutcargoLocation,
            TaskType,
            TaskNum,
            LevelPoint,
            CurrentTaskNum,
            RGVAlarm,
        }

        #endregion
    }
}