|
;************************************************
|
;TYHI
|
;Wheel: YD918 / TSW_449_3
|
;************************************************
|
;PROGRAM-TYPE: Parameter Program
|
|
;VERSION:,2023 /10/23
|
;************************************************
|
|
|
;N1145 N_CHUCK_JAWS=1 ;TYPE OF CHUCK JAWS USED, 0...4 ALLOWED
|
;************************************************
|
; DECLARATION OF THE WOKRING RANGE OF THE CHUCK *
|
;************************************************
|
N100 DEF REAL L_SPOS_SET
|
N110 DEF REAL L_OFFSET
|
N120 DEF REAL L_SPOS_LOWER
|
N130 DEF REAL L_SPOS_UPPER
|
|
N140 L_SPOS_SET=133+180
|
N150 L_OFFSET=2
|
N160 CHUCK_S1=90 ;新增参数A面加工时,夹具松紧类型编号
|
N170 CHUCK_S2=91 ;新增参数A面加工时,夹具松紧类型编号
|
;**************************************************
|
;* POSITION OF MAIN SPINDLE FOR AUTOMATIC LOADING *
|
;**************************************************
|
N180 L_SPOS_LOWER=L_SPOS_SET-L_OFFSET
|
N190 L_SPOS_UPPER=L_SPOS_SET+L_OFFSET
|
|
N200 IF (L_SPOS_LOWER<0.0) OR (L_SPOS_UPPER>360.0)
|
N210 AAA:
|
N220 MSG("给定主轴定向角度上下限值不在0~360度范围内")
|
N230 M0
|
N240 GOTOB AAA
|
N250 ENDIF
|
|
N260 N_SPOS_GANTRY_LOWER=L_SPOS_LOWER
|
N270 N_SPOS_GANTRY_UPPER=L_SPOS_UPPER
|
N280 N_SPOS_GANTRY_LOWER_OP2=L_SPOS_LOWER
|
N290 N_SPOS_GANTRY_UPPER_OP2=L_SPOS_UPPER
|
;*********************************
|
;* 加工参数设定(一) *
|
;*********************************
|
N1000 WHEEL_UNMACHINED=138.5 ;未加工车轮轮辋宽度
|
N1005 WHEEL_MACHINED=131.5 ;加工后的轮辋宽度
|
N1010 SYM_FACTOR=0.5 ;余量分布系数
|
N1015 FLAT=0.14 ;轮缘调整量
|
;*********************************
|
;* 加工参数设定(二) *
|
;*********************************
|
N1020 V_CUT=120 ; ;粗加工线速度
|
N1025 V_CUT_FINE=120; ;精加工线速度
|
N1030 V_CUT_BORE=120
|
N1035 BASE_F=1 ;粗加工进给速度
|
N1040 BASE_F_FINE=1 ;精加工进给速度
|
;*********************************
|
;* 加工参数设定(三) *
|
;*********************************
|
N1045 TREAD_DIAM_SETPOINT =918.8 ;踏面直径设定值
|
N1055 TREAD_DIAM = TREAD_DIAM_SETPOINT ;踏面直径
|
|
;N1075 TREAD_DIAM_MVAL_OFFSET = 0.0 ;踏面余量
|
;N1080 TREAD_DIAM_MACH_ALLOWANCE =4.5 ;踏面余量允差
|
N1085 WHEEL_HEIGHT=WHEEL_MACHINED
|
N1090 TREAD_HEIGHT_S2=65 ;S2的节圆高度
|
N1095 TREAD_HEIGHT_S1=WHEEL_HEIGHT-TREAD_HEIGHT_S2
|
; ;S1的节圆高度
|
N1100 HUB_DIAM_S1=247.5 ;S1的轮毂直径
|
N1105 HUB_DIAM_S2=247.5 ;S2的轮毂直径
|
N1110 HUB_HEIGHT_S1=160.5 ;外辋面到内毂的距离
|
N1115 HUB_HEIGHT_S2=161 ;内辋面到外毂的距离
|
N1120 BOTTOM_DIAM_S1=803 ;内辋直径
|
N1125 BOTTOM_DIAM_S2=798 ;外辋直径
|
N1130 GLOBAL_ALLOWANCE=0 ;全局余量
|
N1135 TREAD_ALLOWANCE=0.8 ;踏面余量
|
N1140 BORE_DIAM=183.5 ;轮毂孔径
|
;*********************************
|
;* 钳口参数设定（不设定） *
|
;*********************************
|
;*******N1145 CLAMPING_JAW_HIGH_S1=126.5 ;S1钳口高度
|
;*******N1150 CLAMPING_JAW_HIGH_S2=154 ;S2钳口高度
|
|
;*********************************
|
;* PARAMETERS FOR CHUCK FLUSHING *
|
;*********************************
|
N300 N_WITH_FLUSHING=1 ;Chuck-Flushing after OP2?
|
N310 N_WITH_FLUSHING_WPTURN=1 ;Chuck-Flushing after OP1?
|
N320 N_FLUSHTIME=15 ;flushing time after OP2 (s)
|
N330 N_FLUSHTIME_WPTURN=10 ;flushing time after OP1 (s)
|
N340 N_FLUSH_SPSPEED=70 ;spindle speed flushing OP2 (max. 25/min
|
N350 N_FLUSH_SPSPEED_WPTURN=50;spindle speed flushing OP1 (max. 25/min)
|
N360 N_FLUSHPOS_XR=500 ;Position X-Axis
|
N370 N_FLUSHPOS_ZR=580 ;Position Z-Axis
|
N380 N_FLUSHPOS_XL=500 ;Position U-Axis
|
N390 N_FLUSHPOS_ZL=580 ;Position W-Axis
|
;******************
|
;* AUX PARAMETERS *
|
;******************
|
N400 N_WITH_APP_MON=0 ;1 ;pneumatic contact monitoring workpiece/chuck on/off
|
N410 STOPRE
|
N420 M17
|
